Rockford Fosgate Prime R1000-1D 1,000-Watt Mono Amplifier

Rockford Fosgate Prime R1000-1D 1,000-Watt Mono Amplifier Review

Rockford Fosgate Prime R1000-1D 1,000-Watt Mono Amplifier Feature

• Class D mono amplifier delivers 1000 watts at 2 ohms, 500 watts at 4 ohms
• Variable low pass crossover with 12dB/octave slope and 40Hz to 130Hz crossover point
• Punch Bass adjustable bass level control of 0 to +12 dB centered at 45Hz
• RCA inputs for signal level input and pass-through jacks for system building
• The input gain control is preset to match the output of most source units

The PRIME R1000-1D is a Class-D amplifier producing unreal power with unmatched efficiency. You simply cannot get a Kilowatt of power from a chassis this small using traditional Class-A/B amplifier designs. The Class-D topology inside the R1000-1D allows the amplifier to produce that much power with an amazing 90% efficiency! The 2-Ohm load mono stability is perfect for four 4-Ohm DVC subwoofers, or you can create your own car-shaking eight woofer system with 2-Ohm DVC subwoofers.

Rockford Fosgate Prime Series Amplification A new generation of performance geared toward the "novice" car audio enthusiast or first time buyer. The Prime series amplifiers feature legendary Rockford Fosgate power, controls, and functions while fitting into any budget. Now more than ever, it's easy to get Rockford Fosgate amplifier DNA into your car audio system.

---

Rockford Fosgate amplification at an unbelievable value. Click to enlarge.

R1000-1D Features

Class-D Topology
High efficiency amplifier design that reduces current consumption from the charging system.

Power and Protect LEDs
The Protect LED illuminates if a short circuit or to low of an impedance is detected at the speaker connections. The amplifier will automatically shut down if this occurs.

RCA Input Jacks
The industry standard RCA jacks provide an easy connection for signal level input. They are nickel-plated to resist the signal degradation caused by corrosion.

RCA Pass-Thru Jacks
This Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location.

Gain Control
The input gain control is preset to match the output of most source units.

Phase Switch
Allows you to select the output phase of the amplifier between 0 degrees and 180 degrees.

Variable Low Pass Crossover
Determine which frequencies you feed your subs with the built-in 12dB/octave Butterworth filter, with a crossover point variable from 40Hz to 130Hz.

Punch Bass
This is an adjustable Bass level control centered at 45Hz @ 12dB/octave.

Remote Punch Level Control
When connected, the "Gain Control" is linked and allows you to remotely control the output level of the amplifier from the dash or center console.

---

R1000-1D Specifications

Number of Channels:	1
Rated Power:	500 Watts RMS x 1 @ 4-Ohms 1000 Watts RMS x 1 @ 2-Ohms
Total Power:	1000 Watts
Dynamic Power:	1029 Watts
Bridgeable:	No
Efficiency (average):	90% @ 4-Ohm 89% @ 2-Ohm
Crossover Controls:	Low Pass (LP): 40Hz-130Hz @ 12dB/octave Butterworth
Tone Controls:	Punch Bass: 0dB to +12dB @ 45Hz
Signal Input:	Low Level: 1 RCA pair
Signal Output:	Low Level: 1 RCA pair
Power Input Connector:	Screw terminal barrier strip
Power Wire Gauge:	4 AWG
Speaker Output Connector:	Screw terminal barrier strip
Speaker Wire Gauge:	8 AWG
Heat Sink Type:	Extruded aluminum
Cooling:	Convection
Remote Controls:	Punch Level Control (when connected, is linked to "gain control" to provide remote output level)
Visual Indicators:	Power Protect
Circuit Topology Class:	Class D
Frequency Response:	20Hz to 130Hz +/-1dB
Shipping Weight:	TBA
Dimensions (HxWxL):	2.40 x 7.67 x 11.54 (in) 6.10 x 19.49 x 29.30 (cm)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1000-1D 500 Watt Mono Amplifier, User's Manual

---

Need More Amp?

Step up to the Punch Series P1000-1BD or the Power Series T1000-1BDCP for more advanced mono amps, or check out the many other Rockford options.

---

Rockford Fosgate Prime Series Amplification

Rockford Fosgate Prime R150-2 150 Watt Stereo Amplifier	Rockford Fosgate Prime R300-4 300 Watt Multi Channel Amplifier	Rockford Fosgate Prime R250-1 250 Watt Mono Amplifier	Rockford Fosgate Prime R500-1 500 Watt Mono Amplifier	Rockford Fosgate Prime R1000-1D 1000 Watt Mono Amplifier

Rockford Fosgate Prime 1000 Watt Mono Class D amplifer with on-board adjustable crossover, gain control. Amplifier features unregulated power supply, and and remote Punch bass level control. CEA Certified RMS Power Rating 500 watts x1 @ 4 Ohms, 1000 watts x1 @ 2 Ohms. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

MTX TNP212D2 Dual 12" Subwoofer And Amplifier

MTX TNP212D2 Dual 12" Subwoofer And Amplifier Review

MTX TNP212D2 Dual 12" Subwoofer And Amplifier Feature

• Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier
• TNA251 amplifier delivers 250 watts x 1 at 2 ohms; 150 watts x 1 at 4 ohms
• Variable low- and high-pass filters offer 40Hz-400Hz range for sound shaping
• TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power
• Enclosure boasts 5/8" MDF construction, aviation-grade black carpet, and embroidered Terminator logo

Here's an enclosure/amplifier combo from MTX for those looking to add some serious subwoofer to their mobile system. This package combines a two-subwoofer enclosure and mono block amplifier, specifically matched to deliver nothing but pure low-end.

Add some chest-pounding low-end to your mobile system. Click to enlarge.

TNA251 amplifier with fan cooling, slim profile, and convenient connections.

A pair of Terminator subs deliver rock-solid performance at an affordable price.

A Complete Amplified Bass System

This Terminator amplified bass system provides all the power you need for a chest-pounding audio experience. Combining the sleek looks and power of a Terminator mono block amplifier with a sealed enclosure housing two 12-inch Terminator subwoofers, it's an ideal solutions for anyone looking to add bass to their vehicle.

TNA251 Amplifier

Terminator amplifiers have a reputation for power, delivering high-quality sound and performance at affordable prices. The TNA251 features a high-sheen, glossy black cover for looks to match the power. All connections are on one side, making it easy to create a custom-looking, clean installation. Rather than weighing you down with heavy aluminum heat sinks, Terminator amplifiers are cooled using a variable speed internal fan. While you crank the volume, the amplifier output increases, which engages the fan for more cool air. This keeps the amplifier performing at its peak level longer and prevents the amplifier from having to go into thermal shutdown due to overheating.

TNA251 Specs

• RMS power (watts): 150 watts x 1 @ 4 Ohms
• Signal-to-noise ratio (1 W): 80 dB
• RMS power (watts): 250 watts x 1 @ 2 Ohms
• Frequency response (+/- 1 dB): 20 to 30 kHz
• THD+N (1 W): Greater than or equal to 1%
• Maximum input signal: 6V
• High-pass filter: variable, 40 to 400 Hz
• Low-pass filter: variable, 40 to 400 Hz

Terminator TNP212D2 Enclosure

The Terminator enclosures are ruggedly constructed using 5/8-inch MDF and aviation-grade black carpet with an embroidered Terminator logo. The Terminator subwoofers are capable of handling 200 watts RMS each, with solid, dependable construction--rock-solid performance at an unbeatable price.

TNE212D2 Specs

• Description: Dual 12-inch, Terminator-loaded sealed enclosure
• Impedance: 2 ohms
• Frequency response (+/- 3 dB): 41 to 150 Hz
• RMS power (watts): 400
• Recommended amp power (RMS): 200 to 400 watts
• MAX power: 1200 watts
• Recommended amp power (MAX): 400 to 1200 watts
• Enclosure size: 29.625 x 15 x 13.875

What's in the Box

TNP212D2 Subwoofer Enclosure, TNA251 Mono Block Amplifier, cables/installation hardware, remote bass control, and user's manual.

MTX created the Terminator series amplified sub system with one thing in mind: to terminate the competition who make inferior quality loaded woofer systems. They did a great job with this system as they thoroughly tested their TN250/1 Class D monoblock amplifier with the two Terminator 12" subwoofers and matched them in the perfect enclosure. Because they built the enclosure to perfect specifications for the subs and amp combo, they allow you to leave your fear of a bad system at the door and instead enjoy hours of clean, loud bass at an unbeatable price. TNE212D Dual Loaded Subwoofer Enclosure Features: 2 12" Terminator Series Subwoofers Included Power Handling: Peak: 1200 watts per pair / 600 watts each sub RMS: 400 watts per pair / 200 watts each sub 2" Aluminum single 4 ohms voice coil Rubber Surround Polypropylene Cone MTX Audio Logo on Dustcap 48oz. Magnet Frequency response: 37-150 Hz Enclosure Features: Dual 12" Sealed Sub Enclosure 5/8" MDF Solid Contruction Durable Black Carpeting Terminator Logo Embroidered into Carpet Front Dimensions: 14"H x 29-1/2"W x 13-1/2"D1 x 11"D2 TN250/1 Monoblock Amplifier Features: Terminator Series Class D Monoblock Car Amplifier RMS Power Rating: 2 ohms: 200 watts x 1 chan. Max power output: 400 watts x 1 chan. LED power and protection indicators Selectable bass boost (0, 6, 12 dB at 40 Hz) Mono gain control Smart engage auto turn-on circuitry Built-in adaptive cooling fans Fixed low-pass filter (85 Hz, 18 dB/octave) CEA-2006 compliant amplifier Frequency response: 20-85 Hz Dimensions: 13-1/16"L x 10-3/16"W x 2-1/4"H 4-gauge power and ground leads recommended.

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure Review

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure Feature

• Sealed enclosure loaded with two 12-inch R1S412 subwoofers
• Constructed with 5/8" MDF and covered with high density carpet
• 600 watts maximum power handling, 300 watts RMS
• Parabolic polypropylene cone, design optimized for sealed enclosures
• High current binding posts

Need Rockford Fosgate bass in a hurry? Drop this dual 12" Prime Loaded enclosure in your ride and let the tunes bump. Featuring high current binding posts, 5/8" MDF construction, and finished with high density carpet, these loaded enclosures will produce more than enough bass.

Rockford Fosgate Prime Series Enclosures Rockford Fosgate took DNA from its big brother to provide a great performing bass enclosures. Constructed from heavy duty 5/8" MDF, these enclosures are built solid and will reproduce bass the way it's supposed to be; accurate and full of impact. The unique "Diamond R" stitching will let your friends know you mean business, and the high density carpet will make sure it looks as good as it sounds.

---

R1L-2X12 Features Enclosure Constructed with 5/8" MDF Covered with high density carpet High current binding posts R1S412 Subwoofer Parabolic polypropylene cone 12 AWG compression terminals 18 gauge stamped steel frame Optimized for sealed enclosures

Drop this dual 12" Prime Loaded enclosure in your ride and let the tunes bump. Click to enlarge.

Loaded with two 12-inch Rockford Fosgate R1S412 subs, optimized for sealed enclosures.

---

R1L-2X12 Specifications

Woofer Quantity:	2
Woofer Size:	12"
Woofer Series:	Prime R1S412
Woofer Impedance:	(2) 4-Ohm SVC Internally wired in parallel to create a 2-Ohm amplifier load
Power Handling:	300 Watts RMS 600 Watts Max
System Configuration:	Sealed
Enclosure Material:	5/8" MDF (Medium Density Fiberboard)
Speaker Connector:	Up to 12 AWG compression terminals
Dimensions:	14" H x 33.75" W x 12.25" D

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure, User's Manual

---

Need a Little More?

Step up to the Punch Series P1L-2X12 ported enclosure for even more solid performance.

---

Prime Series Pre-Loaded Enclosures

Rockford Fosgate Prime R1L-1X10 Single R1 10-Inch Pre-Loaded Enclosure	Rockford Fosgate Prime R1L-1X12 Single R1 12-Inch Pre-Loaded Enclosure	Rockford Fosgate Prime R1L-2X10 Double R1 10-Inch Pre-Loaded Enclosure	Rockford Fosgate Prime R1L-2X12 Double R1 12-Inch Pre-Loaded Enclosure

Rockford Fosgate Prime Double 12-Inch 4 Ohm pre-loaded enclosure. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.

Boss CX122D Chaos Exxtreme 12" Subwoofer 4ohm Voice Coils

Boss CX122D Chaos Exxtreme 12" Subwoofer 4ohm Voice Coils Review

Boss CX122D Chaos Exxtreme 12" Subwoofer 4ohm Voice Coils Feature

• 12-inch subwoofer with 1400 watts maximum power handling
• 4-Ohm impedance
• Custom-tooled, high-efficiency injection cone
• Frequency Response: 25Hz - 3kHz
• Mounting Depth: 4-3/4 Inches

One look and you'll know why they're called Chaos Exxtreme, but form follows function--these subs are ready to deliver some serious low-end without too much damage to your wallet. The CX122 is a 12-inch sub packing 1400 Watts of maximum power.

CX122 Specifications

• Power Handling, Peak: 1400 Watts
• Power Handling, RMS: 700 Watts
• Cone Material: Custom-Tooled, High-Efficiency Injection Cone
• Voice Coil: 2-inch
• Efficiency (1 Watt/1 Meter): 94dB
• Frequency Response: 25Hz - 3kHz
• Impedance: 4 Ohms
• Mounting Depth: 4-3/4 Inches

What's in the Box
Boss CX122D 12" Subwoofer 4-Ohm Voice Coils Boss audio cx122d chaos series 12" dual voice coil subwoofer with a custom mono-piece cone.

Sony STR-DH100 2-Channel Audio Receiver (Black)

Sony STR-DH100 2-Channel Audio Receiver (Black) Review

Sony STR-DH100 2-Channel Audio Receiver (Black) Feature

• 2-channel audio receiver
• 100 watts per channel
• 5 audio inputs/2 audio outputs
• A and B speaker switching for front speakers
• 1/4-inch headphone jack output

Enjoy bolder, quality sound without the fuss. The solid, 2-channel STR-DH100 stereo receiver delivers clear stereo sound for everyday music fans and rooms where a complex home theater system is not needed. With the right mix of inputs and technologies, the STR-DH100 transforms any secondary living environment into a concert hall. In addition, it also includes the Digital Media Port input that allows you to extend your music selection from an iPod, Walkman digital music player, Bluetooth device or from a PC (accessories sold separately).

GOgroove BassPULSE Hi-Fidelity 2.1 Satellite Speaker Stereo Sound System with Subwoofer for PC, Mac, MP3, iPod, Tablets and Home-Theater

GOgroove BassPULSE Hi-Fidelity 2.1 Satellite Speaker Stereo Sound System with Subwoofer for PC, Mac, MP3, iPod, Tablets and Home-Theater Review

GOgroove BassPULSE Hi-Fidelity 2.1 Satellite Speaker Stereo Sound System with Subwoofer for PC, Mac, MP3, iPod, Tablets and Home-Theater Feature

• SonusMax Enhanced 2.1 Channel Speaker System with Dual Full-Range Satellite Speakers with Side-Firing Subwoofer for Powerful FULL-SPECTRUM Audio - Speakers (4w x 2) 8W + Subwoofer 9W - 17W RMS; 34W Peak Power
• Front-loaded volume and bass equalizer for fine-tuning your audio
• Setup is EASY - Works with your PC, Laptop, Mac, MP3, iPod, iPad, Home Theater and other devices with standard 3.5mm audio output (headphone jack)
• Bold, modern design with translucent plexi-glass molding and soothing blue glowing LED accents - Ambient blue lights will be contantly lit while using the BassPULSE. When the bass equalizer is turned up past 80%, the glowing lights will begin to pulsate to the beat of the bass!
• Dimensions - Satellites: 3.4 x 2.4 x 7.4 inches - Subwoofer: 4.3 x 9.1 x 9.4 inches

GOgroove BassPULSE Multimedia 2.1 Channel Speaker System
Pulse. Music. Enjoy.

Full-Spectrum Audio
The GOgroove BassPULSE is equipped with Neodymium DUAL FULL-RANGE satellite speakers with 4 -watts of power each. The SIDE-FIRING 9-watt subwoofer comes with it's own equalizer which is mounted on the front face. With 17-watt RMS power and 34-watt Peak power, the GOgroove BassPULSE will give you plenty of BASS for your buck.

Bold, Modern Design
The most distinctive features on the BassPULSE are it's translucent plexi-glass accents and ambient glowing blue LED lights. Each satellite speaker has five embossed glowing accents. The subwoofer has six embossed glowing accents migrating from volume and bass adjustment knobs. If you decide you want to get the party going, turn up the BassPULSE's bass equalizer past 80% for a pulsating light show that moves to the beat of the bass!

Setup is Easy
Integrate this sounds system with anything using a standard 3.5mm audio output jack(headphone jack). The power cord is attached in the back of the BassPULSE, just plug it into any AC wall outlet.
Next, plug the satellite speaker cord into the back of the BassPULSE. Now just connect your audio source with the included 3.5mm plug.
Flip the power switch, adjust the volume/bass and enjoy your favorite audio with an ambient blue LED glow.

Works Great with All of Your Devices
Enjoy music from many of your favorite audio devices:
PC, Laptop, Mac: Toshiba Satellite , Portege / Acer Aspire One , Timeline X / HP Pavilion / Dell Inspiron / lenovo Ideapad , Thinkpad / ASUS Eee Seashell / Compaq Presario / Sony Vaio / Gateway / Apple MacBook
Tablets: Asus Eee Pad / Samsung Galaxy Tab / Toshiba Thrive / HP Touchpad / Viewsonic Gtablet / Apple iPad / Blackberry Playbook / Motorola Xoom / Acer iconia A500
Home-Theater
MP3, iPod, Zune
iPhone, Android Smartphones

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers Review

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers Feature

• 6.5-inch, two-way component system with 200 watts maximum power handling (100 watts RMS)
• Woofer features carbon fiber & polypropylene injection molded cone with butyl rubber surround
• Treated fabric dome neo-tweeter with integral suspension
• Audiophile-grade crossover with 18dB/octave high-pass and 12dB/octave low-pass at 3.5kHz
• 55Hz - 22kHz frequency response with 89dB sensitivity

Get the best out of your system with a Power series component system. Utilizing a separate audiophile grade tweeter, separate midrange and dedicated 2-way crossover, each part of the system will accurately reproduce music with transparent detail. The T1652-S is a 6.5-inch, two-way component system that handles 200 Watts.

The Rockford Fosgate Power Series Designed to play loud, play hard and sound great, Rockford Fosgate's Power component systems and coaxials combine premium materials with innovative engineering to create high performance speakers for those who live on the edge. When too much is just right!

---

T1652-S Features Speaker Construction 3 levels of tweeter attenuation 5% tolerance high quality poly-capacitors and air-core inductors Butyl rubber surround External audiophile grade component crossover On-axis/off-axis tweeter configuration Recessed tweeter mount uses standard 1-3/4" hole saw Treated fabric dome neo-tweeter with integral suspension DDC Tweeter Mounting Rockford's DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximimum ease of installation. Flex Fit Basket The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted. Multi-OEM Adapter The Multi-OEM Adapter plate allows round component or full-range speakers to fit in certain OEM openings. This allows the speaker the capacity to fit more vehicles VAST Surround The Vertical Attach Surround Technique significantly increases a speaker's effective radiating cone area without complicated installation issues. The result provides up to 25% more effective radiating cone area for the same model speaker.

Get the best out of your system with a Power series component system. Click to enlarge.

External audiophile-grade crossover.

---

T1652-S Specifications

Configuration:	2-Way Component System
Midrange Diameter:	6.5" (165mm)
Midrange Depth:	2.51" (64mm)
Tweeter Diameter:	1.0" (25mm)
Tweeter Depth:	0.50" (13mm)
Frequency Response:	55Hz - 22kHz
Power Handling:	100 Watts RMS 200 Watts Max
Crossover:	High-Pass (HP): 3.0kHz @ 18dB/octave Butterworth Low-Pass (LP): 3.0kHz @ 12dB/octave Butterworth
Sensitivity:	89dB @ 1 watt/1 meter
Grilles Included:	Yes
Mounting Hardware:	Yes
Shipping Weight:	9.4 Lbs.(4.26 Kg.)

---

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

---

What's in the Box

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers (Two Woofers, Two Tweeters, Crossover), Grilles, Grilles/Trim Rings, Tweeter Trim Rings (One Set Brushed Aluminum/One Set Polished Aluminum), Mounting Hardware for Surface/Angle/Flush Mounts, Adapter Plates, User's Manual

---

On a Tighter Budget?

For those seeking a more affordable 6.5-inch component solution, Rockford offers the Punch P1652-S Component Speakers and the R1652-S 6.5-Inch Component Speaker System.

---

Power Series Component Systems

Whatever your application, chances are Rockford has you covered.

Rockford Fosgate Power T152-S 5.25" Power T1 Component Speakers	Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers	Rockford Fosgate Power T1T-S Tweeter Set

Rockford Fosgate Power T1652-S 6.5" Power T1 Component Speakers

DB DRIVE K510D4 Okur K5 Series Subwoofer (10-Inch; Dual 4)

DB DRIVE K510D4 Okur K5 Series Subwoofer (10-Inch; Dual 4) Review

DB DRIVE K510D4 Okur K5 Series Subwoofer (10-Inch; Dual 4) Feature

• 2.5-Inch voice coil
• 4 layer DVC with aluminum former
• Vac PP cone with rubber surround
• Dish style vac aluminum dome
• 102 oz Y30 magnet

DB DRIVE K510D4 Okur K5 Series Subwoofer (10-Inch; Dual 4Ω)

Polk Audio PSW505 12-Inch Powered Subwoofer (Single, Black)

Polk Audio PSW505 12-Inch Powered Subwoofer (Single, Black) Review

Polk Audio PSW505 12-Inch Powered Subwoofer (Single, Black) Feature

• Single powered subwoofer in black for use with stereo or home theater speaker systems
• Equipped with one magnetically shielded 12-inch long-throw woofer
• Slot-load venting minimizes turbulence, noise, and distortion
• Rated to 300 watts of continuous power (460W peak)
• Measures 16-1/8 x 15-1/8 x 18-3/16 inches (HxWxD)

POLK PSW505 - This high quality powered subwoofer makes opens a whole new dimension of thrilling low end sound for audio and home theater systems alike. This versatile, clinically accurate beast handles bombs and bullets and delicate string sections with equal finesse. Polk Audio's PSW series of powered subwoofers were designed to deliver powerful and astonishingly musical bass at amazingly low prices. All the PSW models represent an evolution and refinement towards a truly visceral home-theater bass experience that coordinate with Polk's TSi and RM, and R/M/T Series Speakers for home sound that truly rivals the best that theater's offer. Experience movies, music, shows and games like never before. Pick up a PSW subwoofer and feel its superb build quality. Polk Audio PSW-505 is comprised of top-notch quality components from the driver, the power amp, and the cabinetry to deliver the finest performance. Hi-Roll Surrounds to support longer excursion High current 300 Watt Continuous (460 Watt Dynamic) power amplifier Frequency Range - 23 Hz - 160Hz Adjustable low pass crossover, phase switchand volume control for perfect blending with any main speakers Unfiltered LFE input Magnetically shielded Auto on/off circuit that automatically turns your subwoofer on when it senses a program signal. When no signal is present, the amplifier turns off within 15 minutes Sturdy Feet keep the sub from sliding across the floor when played at high volumes Unit Dimensions - 16-1/8H x 15-1/8W x 18-3/16D; Weighs 56 pounds Warranty - 5 Years Parts and Labor Speaker; 3 Years Parts and Labor Amplifier Subwoofer cable required; not included. Monster Cable is recommended.